9
Use and Maintenance Manual ATS LOGICA CONTROL PANEL with ATS115
WARNING:
The cables in the figures below have a numeration that may not correspond to the control panel in
use.
They only have a demonstrative purpose. See the electrical diagram to identify the right cable
number to take in consideration in order to modify the operating voltage.
The sticker on the control panel rear door identifies the internal equipment.
BEFORE CHANGING THE VOLTAGE:
Disconnect the supply of the following devices: “
KBG
” (capacity 160÷4000A), “
KR-KG
” (capacity
45÷125A), power supply “
A2
” (optional).
“KBG”
“KR-KG”
“A2” (optional)
For the voltage change (size 45÷125A) please contact SICES Sales Department.
Remove the protection panel and disconnect the
changeover switch connector.
KBG = ABB KBG = TECHNOELECTRIC
(Lower side) (Upper side)
Disconnect
the
coil
supply connector.
