8
Use and Maintenance Manual ATS LOGICA CONTROL PANEL with ATS115
Frequency:
1) 50Hz.
2) 60Hz.
It is possible change the frequency values by modifying a parameter on the ATS115 controller (SW).
In order to change the DC voltage, connect the 2.7B wire (identified by red rings) to the RB
wire clamp:
1) Battery Voltage 12Vdc: wire 2.7B to wire clamp 12
2) Battery Voltage 24Vdc: wire 2.7B to wire clamp 24.
(Example of 24Vdc operation)
For the HW change, see the attached document in the documentation supplied with the
control panel and reported below.
WARNING: All voltage switch operations have to be
carried out before the operation start, with absence of
voltage.
THE CONTROL PANEL IS PRODUCED AND CONFIGURED FOR THREE-PHASE + NEUTRAL
400V OPERATIONS.
