SICE S 52A, Инструкция по эксплуатации

Страница: 32 / 132

32 S 52A Operator’s Manual
4. To inflate the tyre, remove it from the tyre changer and place it in the inflation cage
5. Do not use inflation devices (e.g. pistols) connected to the tyre changer using external power supply to the
machine.
6. Never bring your head or other body parts close to a tyre during bead insertion. This machine is not a safety
device against the possible explosion risk of tyres, air chambers or rims.
7. Maintain a suitable distance from the tyre changer during bead insertion, do not approach it.
DANGER: A bursting tyre can cause projections of its parts in surrounding areas with a force sufficient to cause
serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond exactly with the rim
dimensions (printed inside the rim) or if the rim or the tyre are defective or damaged.
The tyre changer is not a safety device and does not prevent tyres and rims from exploding.
Keep other people at a distance
8. Risk of crushing. Presence of moving parts. Contact with moving parts could result in an accident.
• The machine may only be used by one operator at a time.
• Keep other people away from the tyre changer.
• Keep your hands and fingers away from the rim edge during the demounting and mounting process.
• Keep your hands and fingers away from the mounting tool during operation.
• Keep your hands and fingers away from the bead breaker disc during its operation.
• Keep your hands and other body parts away from moving parts.
• Do not use tools other than those supplied with the tyre changer or original accessories.
• Use lubricant that is specific for tyres in order to prevent tyre seizure.
• Pay attention while handling the rim and tyre and while using the lever
9. Hazard of electric shock.
• Do not clean the electric parts with water or high pressure air jets.
• Do not operate the machine with a damaged power cord.
• If an extension is necessary, use a cable with nominal features equal to or greater than those for the
machine. Cables with nominal features that are lower to those of the machine could overheat and
cause a fire.
• Make sure that the cable is positioned so that no one will trip over it and it cannot be pulled.
10. Hazard of eye injuries. During the bead insertion and inflation phase, debris, dust and fluids could be projected into
the air. Remove any debris present in the tread of the tyre and on the tyre surface. Wear protective goggles with OSHA,
CE approval or other certified devices during all work phases.
11. Always carefully inspect the machine before using it. Missing, damaged or worn equipment (including the hazard labels)
must be repaired or replaced before start-up.
12. Never leave nuts, bolts, tools or other materials on the machine. They could remain trapped in moving parts and cause
malfunctions or be projected out of the machine.
13. DO NOT install tyres that are cut, damaged, decayed or worn. DO NOT mount tyres on bent, rusted, worn, warped or
otherwise damaged rims.
14. If the tyre is damaged during the mounting phase, do not try to complete the mounting operation. Remove it and take
it away from the service area, marking it as damaged.
15. The internal parts in this machine could create contacts or sparks if exposed to flammable vapours (petrol, paint thin-
ner, solvents, etc.). Do not install the machine in a narrow area or below floor level.
16. Do not operate the machine while under the influence of alcohol, medicine or drugs. If you are taking
prescription or non-prescription medicine, contact a physician to understand the side effects that the
medicine could have on the ability to operate the machine safely.
17. Always use OSHA, CE approved and authorised personal protective equipment (PPE) or equipment
with equivalent certification while operating the machine. Consult your supervisor for additional
instructions.
18. Do not wear jewellery, watches, loose clothing, ties and tie back long hair before using the machine.
19. Wear protective, non-slip footwear while using the tyre changer.
20. While positioning, lifting or removing wheels from the tyre changer, wear a suitable back support and
use a correct lifting technique.
21. Only suitably trained personnel can use, service and repair the machine. Repairs may only be performed
by qualified personnel. Nexion Engineering technical personnel are the most qualified individuals.
Employers must determine if an employee is qualified to carry out any machine repair safely if the
operator has attempted to make the repair.
22. The operator must pay close attention to the warnings on the equipment labels before starting the
machine.