115
LABEL
The duplication process should be carried out in the
immediate proximity of the receiver CU.
1.
Remove the front door of the already memorised
transmitter by levering the slit at the bottom.
2.
Press and hold the remote programming button.
3.
Press the already memorised SPYCO transmitter button for
one second (the RC to be added will work in the same way
as this button).
4.
Release both buttons of the already memorised SPYCO
transmitter.
5.
Within 8 seconds press the standard use button of the new
SPYCO transmitter. The RC is ready.
6.
To add a further transmitter repeat steps 1 to 5.
If the process is not successful or if errors are made during
programming, wait 20 seconds and start the programming
process again from point 1.
SPYCO
Cod.
6900998
433.92 MHz
Rolling code
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
Содержание 4790786
