60°
POINT MASTER
Model No.
：
K2-32/K2-20
＜
comb.
＞
Thank you for purchasing the Point Master scribe.
For proper use, please read this manual thoroughly and follow the directions.
INSTRUCTION MANUAL
Do not over-tighten when mounting to milling machine.
If Chuck is tightened too much, it may prevent
retraction.
Bring milling machine spindle to a complete stop
before using.
Use only for intended purpose.
●
●
●
①
Mount on the milling machine
chuck.
②
Set the tip 2 to 3mm below
workpiece surface, and hold up
the scribe by hand to enter the
workpiece.
※
Replacement scribe with 85°
tip angle available for tapered
or stepped surfaces.
Mount onto milling machine for marking of workpiece.
High precision scribing can be done easily and
efficiently without the need for height gauges or
machinist square.
●
●
■
PART NAMES
・
DIMENSIONS
■
HOW TO USE
※
Downhill
Milling Machine
Scribe Tool
Model No.
Ｋ２−３２
32
ｍｍ
146
ｍｍ
10
ｍｍ
Body / Scribe: Tool Steel
Scribe Tip: Carbide
5
ｍｍ
0.02
ｍｍ
Ｋ２−２０
20
ｍｍ
510
ｇ
280
ｇ
60°
18
ｍｍ
3.5
〜
4
Ｎ
when compressed
10
ｍｍ
■
SPECIFICATIONS
■
APPLICATION
・
FEATURES
CAUTION
※ Values shown are approximate.
※Dimensions shown are approximate (mm).
60
(146)
(60)
18
φ
10
K2-32 :
φ32
K2-20 :
φ20
Retractio
n
Scribe
（
tip angle:
60°
）
※
Carbide Tip
※
Replacement Scribe
with 85° tip angle also
available.
Tip P/N
…
60°
：
PMC-60
85°
：
PMC-85
Shank
2
〜
3
ｍｍ
<
10
ｍｍ
Click-on
to install
Workpiece
Workpiece
Scribe
Hex Screw
※
Click-on type replaceable Scribe
clicks on for installation or removal.
※
Adjust hex screw (3mm) if Scribe is
not held, or if motion is not smooth
for full range.
Do not tighten too much or Scribe will
not retract.
Shank Diameter
Tip Angle
Length
Scribe Diameter
Retraction Dist
ance
Scribe Force
Concentricity
Steel Ball Diam
eter
Mass
Material
※
Model K2-32 shown.
Scribing
direction
Niigata seiki Co., Ltd.
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL [email protected]
URL http://www.niigataseiki.co.jp
