pg. 4
©Copyright Siborg Systems Inc.
The LCR-Reader is powered by a Li-Ion battery and is rechargeable via a micro-USB. To charge the
battery, simply plug the device into a power source like a computer or USB-wall adapter. The
adapter should have an output voltage of 5V+/- 5% with an output current of 100 mA or greater.
It takes about 2 hours for a full charge, and will last up to 80 hours of continuous use.
General Display Overview
The LCR-Reader's OLED display is divided into sections.
Primary Parameter
: The Primary Parameter is located
in the middle of the screen and uses the largest font.
In the example, the main impedance value is 144.3
pF
Secondary Parameter
: The Secondary Parameter is
located on the top of the screen. This is where the
ESR values can be found and other minor impedance
readings.
Measurement Mode:
Shown in fig.1 as 'AM', this
indicates that the device will automatically determine
the type of component being evaluated. The device
will automatically select the proper measurement mode.
Component Type and Measurement Function
: The LCR-Reader will display what test mode it is
operating under. When measuring a Capacitance, the device will show C, R for Resistance, and L for
Inductance
Test Frequency
: The device is evaluating components with the frequency shown; 100Hz, 1kHz,
10kHz
Battery Icon:
This shows the battery's remaining power.
Display Indicators
Measurement Units
In the following table, the different icons and indicators are explained
Display Indicators
Indicator
Description
A
‘Automatic’ measurement mode
L
‘Inductance’ measurement mode
Содержание LCR-Reader
Страница 1: ......
