I
8
SIBER
®
WIRELESS MULTICONTROL
/ INSTALLATION AND OPERATING MANUAL
NOTE
AWG12-24 wires of 0.2-2.5 mm2 must be used to connect the power supply.
IMPORTANT
To install the device, use 10 x 10 PT10 or M2.2 x 12 hardened galvanised crosshead screws of the plas-fix45 * type.
5.2 INSTALLATION PROCEDURE
5.3. DAMAGE TO THE DEVICE
5.2.1. CONNECTING THE WIRES
5.2.2. INSTALL THE DEVICE
1. Fix the wall plate (F) to the mounting box (G).
Use the correct screws (E).
2. Pull the power supply wires through the face
plate (D).
3. Insert the wires in the correct connection in the
device. See 5.2.1.
4. Fix the device (C) with the correct screws (B)
to the wall plate (F). Ensure that the face plate
(D) is correctly located between the device and
the plate (F).
5. Position and push the cover (A) on the
device (C).
1. Connect
N
to the neutral or blue wire from the power supply.
2. Connect
L
to the live or brown wire from the power supply.
Install the device in accordance with local requirements. The installation must be carried out by a professional.
If the device housing shows signs of damage or parts are missing, the device should be disconnected from the power supply.
