I
5
SIBER
®
WIRELESS MULTICONTROL
DFEVOCTRL08
The manufacturer declares that the
Wireless Multicontrol
complies with the requirements and provisions of directives:
EMC Directive 2014/30/EU
Low voltage directive 2014/35/EU
RED Directive 2014/53/EU
RoHs Directive 2002/95/EC
WEEE Directive 2002/96/EC
2 SAFETY
2.1 DIRECTIVES
3.3. GENERAL DESCRIPTION OF THE DEVICE
The device is equipped with an interface that has five capacitive buttons and one screen.
2.2 SIGNS ON THE UNIT
2.3 GENERAL SAFETY INSTRUCTIONS
Comply with the local safety, labour and environmental regulations.
Comply with all the safety signs on the device.
Be alert and use common sense when working with the device.
Disconnect the power supply when installing or reinstalling the device.
Do not expose the device to humidity or water.
The device is designed solely for use indoors.
Operate the device within its ambient limits.
Only clean the device with a soft, damp cloth. Never use abrasives or chemical cleaners.
Do not paint the device.
3 DESCRIPTION OF THE DEVICE
3.1 INTENDED USE
The device is a user interface and installation for monitoring and configuring the connected heat recovery unit. Any other or
additional use is not the intended use.
3.2 OPERATING PRINCIPLE
The device sets and monitors an interior heat recovery unit (HRU).
This unit controls the interior air quality by varying the speed of the fan.
The device uses wireless communication (RF) to communicate with the HRU.
The capacitive touch buttons on the device can be used to change the HRU configuration.
The liquid crystal display (LCD) screen shows the current operating status of the unit.
When the HRU malfunctions or has a problem, the screen displays the system fault.
Warning: Review the operating instructions as a precaution.
Hazard: Electrical shock risk.
IEC 61140 Protection
CE conformity marking
Dispose of in accordance with the European Community Directive: 2002/96/EC (WEEE)
