SIBER WIRELESS MULTICONTROL v.8 Скачать руководство пользователя страница 2

Children over 8 years old, people with reduced physical or mental abilities and those with little 
knowledge or experience can use this system provided that they are under supervision or 
have received instructions on how to use the system safely and know the associated hazards. 
Children under 3 years old should keep away from the system, unless they are constantly supervised. 
Children between 3 and 8 years old must only turn the system on and off, and always under supervision or if they 
have received clear instructions on how to use the system safely and know the possible hazards, and provided 
that the system has been positioned and installed in the normal position for use. Children between 3 and 8 years 
old must not insert the plug into the socket, clean the system, make changes in its settings or carry out any of the 
maintenance tasks that are usually done by the user. Children must not play with the system.

 
If a new power cable is required, always ask Siber Zone S.L.U. for the spare part. To avoid creating hazards, only 
qualified experts should replace damaged connections to the electrical mains.
Keep the manual close to the device in a safe place.

SIBER

®

 WIRELESS MULTICONTROL

Country: ES

Содержание WIRELESS MULTICONTROL v.8











Отзывы: