manualshive.com logo in svg

Sibata 090130-31, Руководство по эксплуатации


Поделиться
Скачать
background image

 

- 2 -

 Safety Precautions  

The precautionary information that appears in this operation manual is for ensuring that the product is 
used safely and for preventing injury to you and other people and damage to equipment. It is all 
important for ensuring safety and so be sure to read it thoroughly before using the product and observe it 
during use. 

 
 

 About the User (Important) 

This product must be operated only by persons with adequate specialist skills, training, and 
experience to understand the potential dangers of operating the product. 
Personnel who are untrained or still undergoing training may operate the product only under 
guidance from a trained person or a person with specialized experience. 
This instruction manual was written on the assumption that the product will be operated only by 
users who fully understand the potential dangers of operating the product. 

 
 

 Warning Labels 

In this operation manual, precautionary information is labeled. The degree of damage or injury that 
may occur if the product is used without consideration of the corresponding item of precautionary 
information is indicated by one of three labels: DANGER, WARNING and CAUTION. These labels 
indicate precautionary information that is important for ensuring safety and so be sure to observe 
them. 

 

Labels Indicating Degrees of Damage or Injury 

 

DANGER 

Indicates a potentially hazardous situation which, if 
not avoided, could result in serious injury or 
possibly death. 

WARNING 

Indicates a potentially hazardous situation which, if 
not avoided, could result in serious injury. 

CAUTION 

Indicates a potentially hazardous situation which, if 
not avoided, may result in minor to moderate injury 
or equipment damage. 

 
 

Содержание 090130-31

















































Отзывы:

Нет отзывов

Похожие инструкции для 090130-31

Бренды по названию

Популярные бренды

Загрузить еще бренды