Page
All Rights Reserved Shyam Telecom Limited
6/43
Next Generation
Signal Enhancement
CAUTION
It calls attention to a procedure or practice which, if not followed, may result in
personal injury, damage to the system or damage to individual components. Do
not perform any procedure preceded by a
CAUTION until described conditions are fully understood and met.
WARNING!
This equipment complies with FCC & IC radiation exposure limits
set forth for an uncontrolled environment. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
The signal booster with server antenna must be installed to provide minimum
20 cm separation distance between the server antenna and the body of user
or near by person. The donor antenna used for this transmitter must be fixed-
mounted on outdoor permanent structures with a separation distance of at
least 1.5 meters from all persons during normal operation.
The RF electric performance of the DB6MR20 repeater conforms to FCC
requirement of the inter modulation and spurious emission. It avoids
interference problems.
3.3. Electrostatic Sensitivity
CAUTION
ESD = ELECTROSTATIC DISCHARGE SENSITIVE DEVICE
Observe electrostatic precautionary procedures.
Semiconductor transmitters and receivers provide highly reliable performance
when operated in conformity with the intentions of their design. However, a
semiconductor may be damaged by an electrostatic charge inadvertently
imposed by careless handling.
Static electricity can be conducted to the semiconductor chip from the centre
pin of the RF input connector, and through the AC connector pins. When
unpacking and otherwise handling the Repeater, follow ESD precautionary
procedures including the use of grounded wrist straps, grounded workbench
surfaces, and grounded floor mats.
