Seite
24
von
31
3. DESCRIPTION OF THE CONTROL PANEL & THE REMOTE CONTROL
The buttons on the control panel and the remote control are identical.
You can set the functions of the panel using the remote control or directly on the device.
When using the remote control, this must be pointed directly at the sensor on the housing to
ensure that it functions properly.
4. COMMISSIONING THE REMOTE CONTROL
Please follow instructions below.
For the
first operation
with the remote control, please pull the plastic protection out of the
battery compartment.
To
change the battery
please follow the instructions bellow:
1. Pull out the battery compartment, remove the old battery and then insert a new one:
2. Always pay attention to the polarity marking (+/-).
3. Afterwards put the battery compartment back into the remote.
ON/OFF
Remote Control
Signal
Increase
Decrease
Mode button
Setting button