Shuttle TNT, Инструкция по сборке

Страница: 11 / 20

Page 11
STEP 5 INSERTING THE CARRIAGE
ITEMS
REQUIRED
CARRIAGE
TNT RAILS
RUBBER
BUMPERS
1. Insert the Foot-End of the Carriage into the TNT Rails, and let it gently slide along the track
until it contacts the Rebound Blocks. (Pic 5.1)
2. Remove the rubber ball from the Range of Motion (ROM) Control Rope, by untying the knot
at the end of the ROM Control Rope. (5.2)
3. Guide the ROM Control Rope through the red rope guide at the Head-End Stand and push
the rope into the black rope cleat. Once the ROM Control Rope is secured, place the
rubber ball back onto the rope and tie a knot at the end of it. (Pic 5.3)
4. Insert and tighten down the two rubber bumpers removed from the two holes at the Head-
End of the Rails in Step 1. (Pic 5.4)
5.3
5.1
5.2
5.4