Shuttle TNT, Инструкция по сборке

Страница: 7 / 20

Page 7
STEP 3 MOUNTING THE KICKPLATE STRUCTURE
ITEMS
REQUIRED
KICKPLATE
STRUCTURE
PARTS BAG
1. Flip the TNT Rails and Head-End Stand over with the Foot-End resting on the ground.
(Pic 3.1)
2. Remove the 8 bolts (4 on each side) at the Foot-End of the TNT Rails. (Pic 3.2)
3. Position the Foot-End of the TNT Rails to the inside of the Kickplate Structure. Align the
holes and insert the 8 bolts into the rails and through the Kickplate Structure. This job
requires two people. (Pic 3.3)
4. Tighten down all bolts at the Kickplate Structure and Head-End Stand. (Pic 3.4)
5. Place 8 nut caps (4 on each side) from the Parts Bag onto the 8 lock nuts at the Kickplate
Structure.
Pictures are on the next page