- 36 -
Modem Ring Resume
When set to Enabled, any event occurring Modem Ring/activity of LAN will awaken
a system which has been powered down.
RTC Alarm Resume
When set to Enabled RTC Alarm Resume, you could set the date (of month) and
timer (hh:mm:ss), any event occurring at RTC will awaken system which has been
powered down.
Primary INTR
When set to
On
(default), any event occurring at will awaken a system which has
been powered down.
The following is a list of IRQ, Interrupt ReQuests, which can be exampled much as
the COM ports and LPT port above can. When an I/O device wants to gain the
attention of the operating system, it signals this by causing an IRQ to occur. When
the operation system is ready to respond to the request, it interrupts itself and per-
forms the service.
As above, the choices are
On
and
Off
.
When set On, activity will neither prevent the system from going into a power
management mode nor awaken it.
- IRQ3 (COM2)
- IRQ4 (COM1)
- IRQ5 (LPT2)
- IRQ6 (Floppy Disk)
- IRQ7 (LPT1)
- IRQ8 (RTC Alarm)
- IRQ9 (IRQ2 Redir)
- IRQ10 (Reserved)
- IRQ11 (Reserved)
- IRQ12 (PS/2 Mouse)
- IRQ13 (Coprocessor)
- IRQ14 (Hard Disk)
- IRQ15 (Reserved)
