- 22 -
If “Yes”
To save the old BIOS:
1. Please respond “Y”, and then press the ENTER key.
2. Move the cursor to “File Name to Save: “
3. Type file name “TEST.BIN”, and then press the ENTER key. (Your old BIOS
will be saved in the file name you create. In this case, the old BIOS is saved
in the file name, 685V.OLD).
4. Then you will be requested to answer:
“Are You Sure to Program (Y/N)? “
5. Type “Y” to begin programming, and press the ENTER key.
6. When the programming is finished, the showing message will appear:
7. Once you see the showing message “Power Off or Reset System”,
please restart your system.
8. When you power on the computer again, you will find your old BIOS has
already been successfully updated.
To view a complete usage of FLASH utility, please type “awdflash /?” and
press the ENTER key.
Notes About Award Flash Utility
Please note that Award Flash Utility cannot run under
EMM386
or
QEMM
.
Thus, when executing the command “awdflash”, an error message will appear:
“Error Message: Fail — Due to EMM386 or QEMM !”
