Shuttle PN18G Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 47

background image

Shuttle

®

User’s Guide for XPC 802.11b/g Wireless Kit

Manual Version 1.0

FCC Regulation Information

The equipment has been tested and found to comply with the limits for a Class B Digital
Device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

n

Reorient or relocate the receiving antenna.

n

Increase the separation between the equipment and receiver.

n

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

n

Consult the dealer or an experienced radio/TV technician for help.

The equipment is for home or office use.

Copyright

Copyright

©

2007 by Shuttle

®

Inc. All Rights Reserved. This publication, including all photos,

illustrations, and software, is protected under international copyright laws. Reproducing
any of the material contained herein is prohibited without the consent of the publisher.

Disclaimer

Shuttle

®

Inc. shall not be liable for any incidental or consequential damages resulting from

the use of this product. This company makes no representations or warranties regard-
ing the contents of this manual. This company reserves the right to revise the manual or
make changes in the specifications of the product described herein at any time and
without notice and without obligation to notify any person of such revision or changes.

General Notice:

All the other trademarks and registered trademarks are the property

of their respective owners.

«
1
2
3
4
...
»

Содержание PN18G
















































Отзывы:

Нет отзывов

Похожие инструкции для PN18G

Бренд: NEC Страницы: 288

Бренд: Panasonic Страницы: 92

Бренд: Panasonic Страницы: 16

Бренд: Audio Technica Страницы: 2

Бренд: Agent Headsets Страницы: 1

Бренд: Voscom Страницы: 13

Бренд: König Страницы: 2

Compact FLASH III

Бренд: ACS Страницы: 37

Бренд: RadioLink Страницы: 10

Бренд: JVC Страницы: 24

Micro Component System UX-G200

Бренд: JVC Страницы: 4

Бренд: Sharp Страницы: 16

Бренд: Sharp Страницы: 48

Бренд: Sharp Страницы: 44

Бренд: Sharp Страницы: 56

Бренд: Sharp Страницы: 34

Бренд: Sharp Страницы: 20

Бренд: Sharp Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды