6
For i chassis
-
STEP 4-1
Install the XPC 802.11b/g Wireless Kit to the four attachment points
as shown below.
-
STEP 4-2
Install the antenna cable connector through the side reserve hole into the
back chassis and use a lock to secure the antenna from the outside.
Refer to Step5 (Page11).
Caution :
When inserting the cable connector, check the socket alignment and only push
horizontally.
Do not
turn or twist the cable.
Note :
If some difficulty is found while inserting the antenna socket into the reserve hole, make
sure the surface is clean. Finally, check the alignment and then use some more force .
