70
New Password Setting :
1. While pressing <Enter> key to start setting password function, a dialog
box appears to ask you “Enter Password : ”.
2. Key in a new password now. However, the password cna not be over
eight characters or numbers.
3. Then system will request you to confirm new password by asking you to
key in new password again.
4. Once the confirmation is completed, new code takes effect.
No Password Setting :
5. If you want to delete password, just press <Enter> key instead of new
password while password input is requested. And the other procedures
are the same as above password setting.
If You Forget Password :
6. While being asked of password, you just forget it and you must access
the system. The only way is to turn off system and clear CMOS memory.
Please take reference in page 29 for clear CMOS setting.
@
Set Password
This item is to set supervisor paswsword. Please follow below steps.
