66
@
PnP/PCI Configurations
The PnP/PCI Configurations allows you to configure ISA and PCI de-
vices installed.
PNP OS Installed
Setting this option to Yes allows PnP OS (instead of BIOS) to assign
system resources such as IRQ and I/O address to the ISA PnP device.
Ø
The choice: Yes, No.
Reset Configuration Data
If you enable this item and restart system, any PnP configuration data
stored in the BIOS setup is cleared from memory. New updated data is
created.
Ø
The choice: Enabled, Disabled.
Resources Controlled By
You should leave this item at default Auto (ESCD). Under this setting,
system dynamically allocates resources to plug and play devices as they
are required. If you cannot get a legacy ISA (Industry Standard Architec-
ture) add-in card to work properly, you might be able to solve the
problem by changing this item to Manual, and then opening up
IRQ
Resources
and
DMA Resources
sub-menus.
Ø
The choice: Auto, Manual.
In
IRQ Resources
sub-menu, if you change any of IRQ assignations to
Legacy ISA, then that Interrupt Request Line is reserved for a legacy ISA
add-in card. Press
Esc
to close the IRQ Resources sub-meu.
