- 39 -
IR Header (SIR1)
If you have an Infrared device, this mainboard can implement SIR (Standard
IR) transfer function. To enable the IR transfer function, follow these steps:
Pins Assignment:
1=NC
2=KEY
3=+5V
4=GND
5=IRTX
6=IRRX
Note:
Before connect your IR device, please be sure each IR on board pin
allocation is matched with the pin of the IR device. Otherwise,
incorrect IR connection may damage your IR device.
Step 1.
Attach the 6-pin infrared device cable to SIR1 connector.
(Refer to the above diagram for IR pin assignment.)
Step 2.
Configure the Infrared transfer mode in field "UART Mode Select" of
"Super IO Device" of "Integrated Peripheral" sub-menu in BIOS
setup program. This mainboard supports Normal, IrDA or ASKIR
transfer modes.
E3
SI
R
1
2
4
6
1
3
5
Содержание MK32N
Страница 1: ...MK32N Socket A AMD Athlon XP Duron Processor Based DDR Main Board User s Manual...
Страница 20: ...17 3 Single color LED header SJ1 4 SPEAKER SPEAKER 1 5 EPMI Header J1 1 SJ1 SIGNAL NC NC 5V 1 SPEAKER1 J1...
Страница 22: ...19 ATX1 2 IR connector SIR1 3 SPDIF connector SPDIF1 Step 9 Connect Power Supply 1 System power connector SIR1...
Страница 25: ...22 6 Audio Line_out Line_in Mic_In 7 MIDI Game Port MIDI GAME Port Line Out Port Mic In Port Line In Port...