- 42 -
Secondary Slave PIO
In this items, there are five modes defined in manual mode and one automatic mode.
There are
0, 1, 2, 3, 4,
and
AUTO
is the default settings for on board Secondary Slave PIO
timing.
Primary Master UDMA
On this mainboard, VIA VT82C596B improves IDE transfer rate using Bus Master
UltraDMA 33/66 IDE which can handle data transfer up to 33/66 MB/sec. The options are
Disabled,
Enabled and Auto, Auto
is the default settings for on board Primary Master
UltraDMA33/66
.
Note : Your hard drive must also support UDMA for this feature to work.
Primary Slave UDMA
On this mainboard, VIA VT82C596B improves IDE transfer rate using Bus Master
UltraDMA33/66 IDE which can handle data transfer up to 33/66 MB/sec. The options are
Disabled,
Enabled and Auto, Auto
is the default settings for on board Primary Slave
UltraDMA33/66
.
Note : Your hard drive must also support UDMA for this feature to work.
Secondary Master UDMA
On this mainboard, VIA VT82C596B improves IDE transfer rate using Bus Master
UltraDMA33/66 IDE which can handle data transfer up to 33/66 MB/sec. The options are
Disabled,
Enabled and Auto, Auto
is the default settings for on board Secondary Master
UltraDMA33/66
.
Note : Your hard drive must also support UDMA for this feature to work.
Secondary Slave UDMA
On this mainboard, VIA VT82C596B improves IDE transfer rate using Bus Master
UltraDMA33/66 IDE which can handle data transfer up to 33/66 MB/sec. The options are
Disabled,
Enabled and Auto, Auto
is the default settings for on board Secondary Slave
UltraDMA33/66
.
Note : Your hard drive must also support UDMA for this feature to work.
Init Display First
This item is used to determine initial device when system power on. The options are
PCI
and
AGP
.
POWER ON Function
This item is used to defined Keyboard & PS/2 mouse power-on function enabled or
disabled. The options are
Button Only
,
HOT-Key
and
PS/2 Mouse
.
Button Only - Only soft-on/off button on the front panel is available.
KB Power ON Password
This item set the keyboard power-on password. When using keyboard to power on , just
Enter the password.
Hot Key Power ON
Power-on by soft-on/off button and keyboard are available. The user may set power-on
hot-key from <Ctrl><F1> to <Ctrl><F12>.
