- 11 -
Keyboard & PS/2 Mouse Power-On Setting - JP3
HOT-687V mainboard provides an optional power-on function by stroke any key (or hot-
key) on keyboard or double click on PS/2 mouse.
Note: Power-on by serial mouse is not supported
JP3 is the jumper used to set the functions of keyboard & PS/2 mouse power-on Enabled
or Disabled.
When you enabled K/B & PS/2 Mouse Power-ON function, you also have to set the
proper item on
POWER ON function
category of
Integrated Peripherals
of BIOS
setup.
K/B & PS/2 Mouse Power-On JP3
Keyboard &
PS/2 Mouse
Power-On
Disabled
Keyboard &
PS/2 Mouse
Power-On
Enabled
PS/2 Mouse
Power-On
Enabled
Table 3-4
On Board Audio Controller Setting - SJP1
HOT-687V mainboard provides on-board QSound HSP dynamic 3-D positional audio
controller chip. Jumper SJP1 is used to enabled or disabled it.
On-board Audio Controller Enabled
On-board Audio Controller Disabled
Clear CMOS - JP9
HOT-687V mainboard supports jumper
JP9
for
discharging mainboard's CMOS memory.
This jumper can clear the CMOS data stored in
the Giga I/O chip. To clear the CMOS data please
follow listed steps:
1) Turn off the PC,
2) Remove mini jumper from JP9 pin 1-2,
3) Insert mini jumper to JP9 pin 2-3 for a brief while,
4) Remove mini jumper from JP9 in 2-3,
5) Reinsert mini jumper to JP9 pin 1-2,
6) Turn on the PC.
Figure 3-5
