Shuttle HOT-675, Руководство пользователя

Страница: 20 / 50

- 20 -
Back Panel Connectors
Figure 2-29
Figure 2-28
Figure 2-30
COM1/COM2 Connectors
Attach COM1/COM2 device cables to these connectors.
PS/2 Keyboard & PS/2 Mouse Connector
Two 6-pin female PS/2 keyboard & Mouse Connectors is located at the rear of the main board.
PS/2 Mouse on top of connector and PS/2 Keyboard on the bottom of connector. Plug the PS/2
keyboard and mouse jack into this connector.
Parallel Port Connector
A 25-pin female connector is located at the rear of the main board. Plug the parallel port device
cable into this connector.
USB1/USB2 Port Connectors
Two female connectors are located at the rear of the board.
Plug the USB devices jack into this connector.
Other Connectors
ATX Power Supply Connector - J4
It is a twenty-pin male header connector. Plug the connector
from the power directly onto the board connector while the
plug of the power supply will only insert in one orientation.
Fine the proper orientation and push down firmly making
sure that the pins are aligned.
IR Connector - J3
Infrared device connector may attach a 5-pin infrared
device cable to this connector for enabling the infrared
transfer function. This mainboard meets the specification
of ASKIR and HPSIR. Figure 2-30 shows J3's
pin assignment.