Shuttle HOT-559, Руководство пользователя

Страница: 32 / 33

3.11 Password Setting
Supervisor Password and User Password
The options on the Password screen menu make it possible to restrict access to the
Setup program by enabling you to set passwords for two different access modes:
Supervisor mode and User mode.
In general, Supervisor mode has full access to the Setup options, whereas User mode
has restricted access to the options. Thus by setting separate Supervisor and User
password, a system supervisor can limit who can change critical Setup values.
Enter Password
Type the password, up to eight characters, and press <Enter>. The password typed
now will clear any previously entered password from CMOS memory. You will be
asked to confirm the password. Type the password again and press <Enter>. You
may also press <Esc> to abort the selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password.
A message will confirm the password being disabled. Once the password is
disabled, the system will boot and you can enter Setup freely.
Password Disable
If you select System at Security Option of BIOS Features Setup Menu, you will be
prompted for the password every time the system is rebooted or any time you try to
enter Setup. If you select Setup at Security Option of BIOS Features Setup Menu, you
will be prompted only when you try to enter Setup.
Warning : Retain a safe record of your password. If you've forgotten or loosed the
password, the only way to access the system is to clear CMOS memory, please refer
to "Other Jumper Setting" section.