Shuttle HOT-433 Скачать руководство пользователя страница 63

Страница: 63 / 68

Codes

Description

65h

The DMA controller 2 base register test passed. Programming DMA
controllers I and 2 next.

66h

DMA controllers I and 2 have been programmed. Initializing the 8259
interrupt controllers next.

67h

8259 initialization has completed. Starting the keyboard test next.

80h

The keyboard test has started. Clearing the output buffer and checking for
stuck keys. The keyboard reset command will be issued next.

8 1 h

A keyboard reset error or stuck key was found. Issuing the keyboard
controller interface test command next.

82h

The keyboard controller interface test completed. Writing the command

byte and initializing the circular buffer next.

83h

The keyboard command byte was written and global data initialization has
completed. Checking for a locked keyboard next.

84h

Keyboard locked key checking has completed. Checking for a memory
size mismatch with the data in CMOS RAM.

85h

The memory size check has completed. Displaying soft errors, checking

for a password, or bypassing WINBIOS and AMIBIOS Setup next.

86h

The password as been checked. Doing programming before WINBIOS
and AM !BIOS Setup runs next.

87h

Programming before WIN BIOS and AMIBIOS Setup has completed.

Uncompressing the WINBIOS and AMIBIOS Setup code and executing

WINBIOS and AMIBIOS Setup next.

88h

Returned from WINBIOS and AMIBIOS Setup and screen is cleared.

Doing programming after WIN BIOS and AMIBIOS Setup next.

89h

Programming after WINBIOS and AMIBIOS Setup has completed.
Display the power-on screen message next.

8Bh

First power-on screen message displayed. The Wait ... message is also

displayed. Shadowing of the system BIOS and Video BIOS will be done

next.

8Ch

The system and Video BIOS have been shadowed successfully. Program
ming system configuration options after WINBIOS and AMIBIOS Setup
about to start.

8Dh

The WINBIOS and AMIBIOS Setup options have been programmed. The

mouse check and initialization will be done next.

8Eh

The mouse check and initialization have completed. Resetting the hard

disk controller next.

User's Manual 61

•

Содержание HOT-433





































































Результаты поиска

Содержание HOT-433

Отзывы:

Похожие инструкции для HOT-433

Бренды по названию

Популярные бренды

Shuttle HOT-433, Руководство пользователя

Результаты поиска

Содержание HOT-433

Отзывы:

Похожие инструкции для HOT-433

Бренды по названию

Популярные бренды