Shuttle AB61, Руководство пользователя

Страница: 54 / 64

- 52 -
Video Off After
This item define when to activate the video off feature for monitor
power management. The settings are N/A, Doze, Standby and Sus-
pend.
MODEM Use IRQ
This item determines the IRQ in which the MODEM can use.
The choice: 1, 3, 4, 5, 7, 9, 10, 11, N/A.
Doze Mode
When enabled and after the set time of system inactivity, the CPU
clock will run at slower speed while all other devices still operate at
full speed.
Standby Mode
When enabled and after the set time of system inactivity, the fixed disk
drive and the video would be shut off while all other devices still
operate at full speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off.
HDD Power Down
This item defines the continuous HDD idle time before the HDD
enters power saving mode (motor off). The options are from 1 min to
15 min and
Disabled .
Throttle Duty Cycle
This item determines the duty cycle for the clock control thermal
throttling mode. The duty cycle indicates the percentage of time while
in the thermal throttle mode. The settings between 12.5% and 87.5%.
PCI/VGA Act-Monitor
If this item is set to Enabled, the PCI/VGA activity event will be moni-
tored to reload global timer.
Soft-Off by PWR-BTTN
The setting of
Instant-Off
allows the ATX switch to function as a
normal system power off button when pressed for less than 4 seconds.
The setting of
Delay 4 Sec. allows the button to have a dual function
where to press the button for less than 4 seconds will place the system
in suspend mode, and pressing the button for more than 4 seconds
will shut place the system off.