![background image](http://html.mh-extra.com/html/shure/u-series/u-series_user-manual_1262443014.webp)
ENGLISH
ENGLISH
3. Press and hold down the MODE button until only the Group number is displayed,
as shown in Figure 38.
FIGURE 38
4. Press the SET button to increment the Group setting, as shown in Figure 39.
FIGURE 39
NOTE: If the SET button is held for more than 5 seconds, the display will go into the
fast increment mode. if more than 20 seconds of inactivity elapse, the display will
return to the original settings.
5. Press the MODE button again so that only the Channel number is displayed, as
shown in Figure 40.
FIGURE 40
6. Press the SET button to change the Channel setting, as shown in Figure 41.
FIGURE 41
7. Press the MODE button again so that the new Group and Channel numbers are
both displayed.
NOTE: On transmitter, the transmitter operating frequency does not change until
new settings are saved.
24
25