background image

3

SCM820 Description

Front Panel

① Channel Mode Selection

Press the button to select the function of the channel knobs and monitor 

LED rings. See the Audio Signal Adjustment section for details on each 

mode.

② Assignable Channel Knob

Adjusts settings and status for each input: 

Rotate: 

Adjusts a setting.

Momentary Press: 

Solos the channel to the headphone output.

Press and Hold: 

Mutes the audio or bypasses the EQ setting.

③ Monitor LED Ring

13 LED segments display gain setting, input signal meter, IntelliMix gain 

meter, channel solo, or EQ setting.

④ Channel Status LED

LED

Channel Status

Off

Channel is closed (attenuated in the automix).

Green

Channel is open (selected in the automix).

Amber

Channel EQ is bypassed.

Flicker Red

Signal is clipping. Set the channel to a lower input 

gain level.

Solid Red

Channel is muted.

⑤ Auxiliary Input Jack (1/8")

Unbalanced aux input sums left and right channels to mono. Front and 

back panel aux inputs are summed to a mono signal and routed 

without 

automixing

 to the mix outputs.

⑥ Master Output Knob

Adjusts settings and status of the mix outputs. See Front Panel Modes for 

details.

Rotate: 

Adjusts output gain or limiter threshold. 

Momentary Press: 

Overrides a soloed channel to return the mix to the 

headphone output. 

Press and Hold: 

Mutes the audio or bypasses the limiter. 

⑦ Master LED Ring

Displays gain setting or limiter threshold. A single LED represents each 

mixer when they are both selected but set to different levels.

⑧ Master Mode Selection

Selects the function (gain or limiter) of the master knob and LED ring.

⑨ Mix Select Button

Selects Mix A, Mix B, or both for adjustment with the master knob and 

monitoring on the LED ring and headphone output. 

Note: 

When both Mix 

A and Mix B are selected, the headphone output only monitors Mix A.

⑩ Mix Status Indicator

LED

Mix Status

Green

Mix is selected for adjustment and listening on the 

headphone output.

Amber

Limiter is bypassed.

Red

Mix is muted.

⑪ Audio Output Meters

Monitor the output signal level and limiter threshold for mix A and B.

⑫ 

LIM

 (Limiter) LEDs

Illuminate amber when the audio levels exceed the limiter threshold.

⑬ System Status Indicators

The LEDs illuminate to indicate system settings:

LED

Color

Status

power

Green

Unit is powered on. 

ethernet

Green

Unit is connected to a network.

network audio

Green

All connected receive channels 

are OK (receiving digital audio as 

expected).

Flashing Green

One or more connected receive 

channels experiencing a 

subscription error or is unresolved 

(transmitting device is off, 

disconnected, renamed or has 

incorrect network setting).

Red

Clock synchronization problem.

Off

No receive channels connected 

(routing has not been established).

automix link

Green

Two or more mixers are connected 

in a link group.

Flashing Green

Link Group is configuring.

Off

Mixer is in standalone mode.

dual mixer

Green

Mixer is set to Dual Mixer operation.

Off

Mixer is set to Single Mixer 

operation.

lockout

Red

Front panel controls are locked. 

Flashing Red

An adjustment is attempted in 

lockout mode.

⑭ Headphone Volume Knob

Adjust the volume of the headphone output.

⑮ Headphone Output Jack (1/4 in.)

Monitor a mix or a soloed channel.

AUX IN

MASTER

lockout

power

ethernet

network audio

automix link

dual mixer

LIM

A

B

-9

-18

-24

-36

-48

-60

0

gain

limiter

L+R SUM

gain

low cut

hi shelf

meter

push to solo | hold to mute

1

2

3

4

5

6

7

8

A B

HEADPHONE

⑭ ⑮

② ③

IntelliMix

SCM820

®

Содержание SCM820-DAN





































Отзывы: