DCS 6000 Digital Conference System
User Manual
7
Operating instructions
RP 6004 Repeater
General description
The RP 6004 Repeater provides repeater and
splitter functionality for the DCS 6000 system.
One CU 6010 Central Unit is needed in each DCS
6000 system, however for expansion of the system
the RP 6004 Repeater is suitable.
The RP 6004 consist of the following main parts:
•
Repeater board with 4 individual repeated
outputs.
Features
The main features of the RP 6004 Repeater are:
•
4 outputs for connection to Delegate Units,
Interpreter Units etc.
•
Loop through connectors for connecting
additional RP 6004 or other units, which are
part of the DCS 6000 system.
•
Delayed switching on of power to the four
chains, to minimise the total ‘switch-on’
current on the Mains supply.
•
Designed in compact cabinet for easy
installing remotely.
•
Optional 19” brackets.
User Controls, indications & connectors
Front plate layout
Front plate controls
The RP 6004 Repeater does not feature any controls
or displays, however the following indications and
connectors are available:
Loop through connectors
RJ45 connector, 2 pieces
DCS-LAN connectors. Used for connection to one of
the chain connector on the CU 6010 for repeating
the DCS-LAN chain.
The second connector is for connection to other
units with DCS-LAN connector, such as more RP
6004.
The loop through connectors has auto-termination.
Repeated Chain 1, 2, 3 & 4
RJ45 connector, 4 pieces
DCS-LAN connectors. Used for connection to
DM/CM6xxx, CS6032, EX6010, AO6008, JB
6002/4 or IS6032 Interpreter Sets.
Unused repeated chains do not need termination
Power LED
Those LED light up when Power is available on
the connector next to the LED
Incoming data LED
Those LED flashes, when the unit receives
incoming data from connected units on the
connector next to the LED.
System design
There are no settings to be done on the RP 6004
Repeater.
However it is important to observe, that the unit
is only repeating one of the chains on the CU
6010 Central Unit.
