manualshive.com logo in svg

Shure MXW Series, Руководство пользователя, Страница: 46 / 59

Поделиться
Скачать
Shure MXW Series Скачать руководство пользователя страница 46

46

Software

① Language

Selects the language for the control software when the ANI is in 

Standalone Mode. In Standalone Network mode, this is defined in the 

MXW System control software.

② Device Serial Number

Displays the devices serial number.

③ Firmware Version

Displays the current firmware version of the device.

④ Reset Button

Reboots the device with factory default settings.

⑤ Register This Product Link

Click to register the device at www.shure.com to receive product and 

software updates.

⑥ Audio Routing Mode

• 

MXW Mode: 

Enables automatic channel routing when the device 

is a part of an MXW group (assigned from the MXW System control 

software).

• 

Standalone Mode: 

Channels must be routed manually with Dante 

Controller software.

⑦ Device Name

Device names can be customized with up to 31 characters, except '=','.' 

or '@'.

⑧ Addressing Mode

Auto: 

IP settings are Link-Local or automatically accepted from a DHCP 

server.

Manual: 

IP settings (IP Address, Subnet Mask, and Gateway) are static 

and are entered manually.

⑨ MAC Address

Unique identifier assigned to each network interface.

⑩ Port 4 Mode

Configures the Port 4 of the network interface: 

• 

Switched Mode (default): 

Full Ethernet support on port 4.

• 

Uplink Mode: 

Only control data is transported. Multicast traffic for 

Dante digital audio and the Shure Web Device Discovery application is 

restricted.

⑪ Front Panel Lockout

Disables the front panel controls on the hardware. Channels can still be 

selected for monitoring at the headphone jack.

⑫ Password

The default password for the device is 'admin'.

• 

Admin (default): 

Full editing rights. The Admin can enable or disable a 

Tech-level logon.

• 

Tech:

 Rights are limited to the Inputs/Outputs page (hardware functions 

only).

• 

Guest:

 Monitoring only.

Preferences Tab

①

②

⑤

③

⑩

⑪

⑥

⑦

⑧

⑫

Содержание MXW Series




























































Отзывы:

Нет отзывов