26
Setting Up the System
Creating Separate Configurations
Viewing Devices
Use the Device list to mange all open devices on the network and
devices assigned to this Configuration
Use the Utility tab to view detailed information on all devices on
the network. This page can be filtered to only show devices in
the Configuration.
For installations that spread across multiple rooms, a different set of preferences and global controls may be required for a given space. Do this by setting up
a separate Configuration:
1. Open the Shure Web Device Discovery Application.
2. Select the Access Point that will be used for the new Configuration and open its control software. The APT must be open (not already assigned to a group)
in order to start a new configuration.
3. Go to the Configuration tab.
4. Select that Access Point from the drop down list in Row 1. Use the ID button to ensure the correct Access Point is selected.
5. Select the charging station(s) and output device(s) to complete the Group.
6. Repeat 4-5 for up to 10 Groups in the Configuration.
7. Customize the Configuration as desired from the Preferences tab.
Note:
Ensure that all APTs are connected to the same network and set to the same subnet, even if they are assigned to a separate Configuration. This
ensures the best system performance, highest channel count, and tightest digital audio clocking for the installation.
Device Availability
When setting up a group or managing devices, it is important to understand the difference between open and associated devices.
Open Device
A device that is not associated to a group is considered 'open.' Open devices are available for association by selecting the drop-down window in a Group row.
Additionally, any open device can be managed from any Configuration on the network from the Device List drop-down window in the Configuration tab.
Associated Device
A device is considered 'associated' once it has been selected in a group row. Each device can only belong to one group at a time (and therefore one
Configuration). Once a device has been associated to a group, it is managed on the Configuration tab can be viewed in detail on the Utility tab. Devices
associated to a group are not viewable from other Configuration's Device List.
A device can be unassociated by selecting 'none' in the group row drop-down to clear it from the group. The device is then open and available for association
to another group.
Tip: Performing a factory reset will default the device to open.
MXWANI8
mxwani8-ffeee5.local
192.168.200.22
Dante
Dante
ROOM 5
MXWAPT8
mxwapt8-ffaaa2.local
192.168.200.23
CONFERENCE
①
②
③
7
8
6
5
1
2
3
4
④
lockout
power
ethernet
network audio
push to solo | hold to mute
-9
-18
-24
-36
-48
-60
0
-9
-12
-18
-24
0
aux
mic
adjust
line
sig/clip
mute
INPUT
A
sig/clip
mute
OUTPUT
HEADPHONE
Audio Network Interface
B
1
2
3
4
5
6
7
8
line
aux
MICROFLEX WIRELESS
AUX IN
MASTER
lockout
power
ethernet
network audio
automix link
dual mixer
LIM
A
B
-9
-18
-24
-36
-48
-60
0
gain
limiter
L+R SUM
gain
low cut
hi shelf
meter
push to solo | hold to mute
1
2
3
4
5
6
7
8
A B
HEADPHONE
IntelliMix
SCM820
®