Shure Incorporated
11/59
•
•
Dimming and Disabling
To dim or turn off the LED, use the brightness fader.
Power Over Ethernet (PoE)
This device requires PoE to operate. It is compatible with both
Class 0
and
Class 3
PoE sources.
Power over Ethernet is delivered in one of the following ways:
A network switch that provides PoE
A PoE injector device
Reset Button
The hardware reset button is located inside a grille hole and can be pushed with a paperclip or other small tool. The hole is
identified with a gray circle. When looking at the Shure logo, it is the second hole in the fourth row from the top.
Reset Modes
Network reset (press button for 4-8 seconds)
Resets all Shure control and audio network IP settings to factory defaults. Red LED along bar.
Full factory reset (press button for longer than 8 seconds)
Restores all network and web application settings to the factory defaults. Multicolor flash, then blue LED along bar.
Software Reset Options
Reboot Device (
Settings
>
Factory
Reset
):
Power-cycles the device as if it were unplugged from the network. All settings
are retained when the device is rebooted.
Default Settings (
Presets
>
Restore
default
settings
):
Restores audio settings back to factory settings (excluding de
vice name, IP settings, and passwords).
Содержание Microflex Advance MXA910
Страница 28: ...Shure Incorporated 28 59...