manualshive.com logo in svg

Shure ANI22-BLOCK, Руководство пользователя

Поделиться
Скачать
Shure ANI22-BLOCK Скачать руководство пользователя страница 31

9/12/17, 9(22 AM

Shure Publications | User Guides | ANI22

Page 31 of 35

http://pubs.shure.com/guide/ANI22/en-US

ANI22 Response:
< REP HW_GATING_LOGIC ON >

< REP HW_GATING_LOGIC OFF >

The ANI22 will respond with one of these
strings.

Get Mic Logic LED In

Command String:
< GET CHAN_LED_IN_STATE >

ANI22 Response:
< REP CHAN_LED_IN_STATE ON >

< REP CHAN_LED_IN_STATE OFF >

The ANI22 will respond with one of these
strings.

Set Mic Logic LED In

Command String:
< SET CHAN_LED_IN_STATE ON >

< SET CHAN_LED_IN_STATE OFF >

Send one of these commands to the ANI22.

ANI22 Response:
< REP CHAN_LED_IN_STATE ON >

< REP CHAN_LED_IN_STATE OFF >

The ANI22 will respond with one of these
strings.

Get Input Meter Display Mode

Command String:
< GET INPUT_METER_MODE >

ANI22 Response:
< REP INPUT_METER_MODE PRE_FADER >

< REP INPUT_METER_MODE POST_FADER
>

The ANI22 will respond with one of these
strings.

Set Input Meter Display Mode

Command String:
< SET INPUT_METER_MODE PRE_FADER >

< SET INPUT_METER_MODE POST_FADER
>

Send one of these commands to the ANI22.

ANI22 Response:
< REP INPUT_METER_MODE PRE_FADER >

< REP INPUT_METER_MODE POST_FADER
>

The ANI22 will respond with one of these
strings.

Important Product Information

The equipment is intended to be used in professional audio applications.

Note: This device is not intended to be connected directly to a public internet network.

Содержание ANI22-BLOCK




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды