9/12/17, 9(22 AM
Shure Publications | User Guides | ANI22
Page 13 of 35
http://pubs.shure.com/guide/ANI22/en-US
Sources
analog line input
ɢ
Analog Output
Devices
Loudspeakers, amplifiers, or recording devices connect to the
analog line output
ɣ
Dante-enabled
Equipment
Dante microphones, such as the Shure Microflex Advance ceiling
and table arrays connect to the network switch and can be routed
using Dante Controller software.
ɤ
Control CPU
A computer connected to the network accesses the web
application to control the channel levels and processing.
ɥ
Network Switch
The network switch provides Power over Ethernet (PoE) to the
ANI22, while also supporting all other Dante-enabled audio
equipment.
Summing
The Audio Network Interface provides channel summing to combine input signals and
send them over a single output channel. This makes it possible to send all channels to a
device with a limited amount of Dante receiver channels or analog inputs. The relative
channel levels are not affected; the mix is summed in the device and sent over a single
output channel.
Note: When summing is enabled, a limiter is activated to prevent signal overloading. The limiter never
applies to the direct outputs, and only affects the summed signal.
To enable, select one of the summing options in the toolbar at the top of the mixer in the
channels tab.
Logic Applications
