manualshive.com logo in svg

Shure ANI22-BLOCK, Руководство пользователя

Поделиться
Скачать
Shure ANI22-BLOCK Скачать руководство пользователя страница 21

9/12/17, 9(22 AM

Shure Publications | User Guides | ANI22

Page 21 of 35

http://pubs.shure.com/guide/ANI22/en-US

1.  Open the Help menu
2.  Select View Event Log

Severity Level

Information

An action or event has been successfully completed

Warning

An action cannot be complete, but overall functionality is stable

Error

A problem has occurred that could inhibit functionality.

Log Details

Description

Provides details on events and errors, including IP address and
subnet mask.

Time Stamp

Power cycles:days:hours:minutes:seconds since most recent boot-
up.

Event ID

Indicates event type for internal reference.

Tip: Use the filter to narrow down results. Select a category heading to sort the log.

ANI22 Command Strings

This document can also be found at:

http://shure.custhelp.com/app/answers/detail/a_id/6368

The device is connected via Ethernet to a control system, such as AMX, Crestron or
Extron.

Connection: Ethernet (TCP/IP; select “Client” in the AMX/Crestron program)

Port: 2202

Conventions

The device has 4 types of strings:

GET

Finds the status of a parameter. After the AMX/Crestron sends a
GET command, the ANI22 responds with a REPORT string

SET

Changes the status of a parameter. After the AMX/Crestron sends
a SET command, the ANI22 will respond with a REPORT string to
indicate the new value of the parameter.

REP

When the ANI22 receives a GET or SET command, it will reply with
a REPORT command to indicate the status of the parameter.
REPORT is also sent by the ANI22 when a parameter is changed
on the ANI22 or through the GUI.

SAMPLE

Used for metering audio levels.

All messages sent and received are ASCII. Note that the level indicators and gain
indicators are also in ASCII

Содержание ANI22-BLOCK




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды