5). Many to many
A. Prepare the TX and RX as well as the Switch following the steps at the above
B. Connect TX and the HDMI source with a HDMI cable, HDMI cable should be no more than
15m depends on the quality. TX quantity is no more than 64 according to the 6 Bit DIP, daisy
chain the switch if its RJ45 port is not enough.
C. Connect RX and the display with a HDMI cable, HDMI cable should be no more than 15m
depends on the quality. RX quantity is no more than 256 -TX quantity, daisy chain the switch if
its RJ45 port is not enough.
D. Connect TX and the switch with cat5e or cat6 cable, the cat5e/6 cable should be no more
than 120m depends on the quality
E. Connect RX and the switch with cat5e or cat6 cable, the cat5e/6 cable should be no more
than 120m depends on the quality
F. Power on TX and RX with adapter 5V 2A, power on the switch with its adapter
G. Switch the sources according to your need. Switch methods is to switch the RX group ID
to the same group ID of TX as you need. Including changing the group ID by the DIP and Web
browser as introduce at the above.
HDMI Display
HDMI cable
HDMI cable
HDMI cable
HDMI
cabl
e
Cat5e cable
Cat5e cable
RS
232
cabl
e
RS
232
cabl
e
RS
232
cabl
e
RS232 cable
IR-T
X
HDMI cable
PS3,Blu-ray DVD player, et c.
HDMI Source
Giga Web smart switch
Transmitter
HDTV
HDTV
HDTV
DVD or STB remote
Receiver
DVD or STB remote
Receiver
DVD or STB remote
Receiver
Free rotate camera
Free rotate camera
Free rotate camera
PC
IR-R
X
HDMI cable
RS
232
cabl
e
HDTV
DVD or STB remote
Receiver
Free rotate camera
IR-R
X
IR-R
X
IR-R
X
