7. Dimension(mm)
MODEL A
B
C
D
E
APK30-4 308
302 377
344
±
1.0
φ
9.0
APK38-4 304
400 480
431
±
1.0
φ
9.0
APK45-4 390
485 569
514
±
1.0
φ
10.5
APK60-4 425
605 746
685
±
1.0
φ
13
Ⅳ
.OPERATING INSTRUCTIONS
1.
Power source: Before operating, check if the country’s power comply
with the rated power.
2.
The fan should be installed at place over 2.3meters above the ground.
The motor shaft should be parallel to the ground.
3.
When use plug socket to provide power, the cord of the fan should be
attached to plug up to national standards, if the cord is directly
connected with the supply line, then a full-pole power switch with a
contact gap of at least 3 mm should be fitted on the supply line.
4.
The yellow-green contact is an earth wire, which must be properly
connected.
5.
The blue cord is a neutral wire, which should be connected with the
connector marked
“
N
”
Ⅴ
. WARNINGS
1.
The fan should be installed by qualified technician.
2.
When installing or cleaning, do not bump the blades or willfully alter
their angles.
3.
Before cleaning, cut off the power first. The blade can be taken down
and erased with cotton or soft cloth wet with soap water.(Do not use
petrol or any other corrosive liquids which are harmful to paints).
4.
A qualified technician should be engaged to repair the fan in case of any
failure or malfunction in order to avoid hazard or unnecessary damage.
Содержание APK30-4
Страница 3: ...III PARTS DIAGRAM ...
