III. PARTS DIAGRAM
Страница 1: ...INDUSTRIAL VENTILATING FAN MODEL APK30 4 APK38 4 APK45 4 APK60 4 INSTRUCTION MANUAL Please read instruction carefully before operation ...
Страница 2: ...N 1 Fasten the four Mounting Jaws on the motor as per Figure 1 shown 2 Insert the four sets of Isolation Rubber Jaw cap into the other end of the Mounting Jaw 3 Fix the Mounting Plate frame with Mounting Jaw 4 Fix the Blade into the Shaft and ensure it is fixed be sure set screw has been locked in the counter bore 5 If include Front Guard installation steps for step 3 and step 4 should be reversed...
Страница 3: ...III PARTS DIAGRAM ...
Страница 4: ...then a full pole power switch with a contact gap of at least 3 mm should be fitted on the supply line 4 The yellow green contact is an earth wire which must be properly connected 5 The blue cord is a neutral wire which should be connected with the connector marked N Ⅴ WARNINGS 1 The fan should be installed by qualified technician 2 When installing or cleaning do not bump the blades or willfully al...