SR501 EN Operation Manual
- 32 -
►Press “SET” button again, “42
o
C” blinks on the screen.
►Press “▲▼” button, to adjust switch-off temperature, adjustable range (ON+2
o
C)
~
55
o
C, factory set is 42
o
C.
►Press “SET” or “ESC” button to confirm.
►Press “▲” button, to the first time-section setting, “tC 1O 00:00” displays
(switch
–on time of the first time-section of DHW pump)
►Press “SET” button again, hour “00” blinks on the
screen.
►Press “▲▼” button, to adjust hour of the switch-on time
►Press “SET” button again, minute “00” blinks on the screen.
►Press “▲▼” button, to adjust minute of the switch-on time
►Press “SET” or “ESC” button to confirm.
►Press “▲” button, to the first time-section setting, “tC 1F 23:59” displays
(switch
–off time of the first time-section of DHW pump)
►Press “SET” button again, hour “23” blinks on the
screen.
►Press “▲▼” button, to adjust hour of the switch-off time
►Press “SET” button again, minute “59” blinks on the screen.
►Press “▲▼” button, to adjust minute of the switch-off time
►Press “SET” or “ESC” button to confirm.
►Press “▲” button, to the second time-section setting, repeat above steps to
set the second time-section and the third time-section.
Note
:
If it is needed to close one time-section, just set its start time and stop time at a
same value (e.g. 10:00 starts, 10:00 stops)