SR501 EN Operation Manual
- 21 -
the electrical heater is triggered to heat to the desired temperature.
Timing filling and heating factory default reference as below:
• The first time: at 3:00 a.m. to fill water to the water level of 50%, at
4:00 a.m. to trigger electrical heater to heat water to the temperature of 50oC, to
provide hot water for users just after getting up.
• The second time: at 9:00 a.m. to fill water to the water level of 100%,
and electrical
heater doesn’t work, to use solar irradiation to heat water.
• The third time: at 16:00 p.m. to fill water to the 100% water level, and
at 17:00 p.m.to trigger electrical heater to heat water up to the temperature of
60oC for night using.
Note:
1) Above parameters can be set base on the user's habit.
2)When water is using(water level drops),then water filling is delayed for 30
minutes to start.
Setup steps:
►Press “SET” button, time displays on the screen.
►Press “▲” button, time of the 1
st
timing water filling (Time Water
①
) 03:00
,
water level 50% displays.
►Press “SET” button, hour “03” blinks on the screen.
►Press “▲▼” button, to set hour
►Press “SET” button, minute “00” blinks on the
screen.
►Press “▲▼” button, to set minute
►Press “SET” button, water level “50%” blinks on the
screen.
►Press “▲▼” button, to set water level
►Press “SET” or “ESC” button to confirm the setting.
►Press “▲” button, time of the 2
nd
timing water filling (Time Water
②
) displays.