Flight Preparation
Applying Environment
(1) Choose an open place to fly where having no tall buildings.
(2) Do not use this product in severe weather,such as strong wind,heavy snow,rain or
fog days.
(3) Please keep away from obstacles, crowds,high-voltage wires,trees,water,etc,when
flying.
(4) Do not fly in the area where there is complex electromagnetic environment (as
near communication base station, signal transmission tower, or high-voltage station,
etc.).
(5) Do not fly in the area where it is not allowed to fly by laws and regulations.
(6) Do not use this product in airports, stations and their surroundings.
Please have flight training before using the product (User should be guided by a
professional.). Please choose appropriate flight environment when using the product.
Preflight Inspection
Please inspect the following items before flying:
(1) Whether the drone and remote control are both with fully battery power.
(2) Whether the propellers are installed correctly and without any damage.
(3) Whether the propellers can ran normally when the produce is started.
Linking Remote Control and the Drone
(1) Place the drone on the level ground.
(2) Turn on the switch of the drone first, and then turn on the switch of the remote
control.
(3) As shown in figure, push the left lever of remote control fully forward, wait for a
chime to sound, then pull the lever fully rearward, and wait for a second chime. When
this last chime has sounded,the lights on drone turn from flashing to constant, the
drone is ready to fly.
If the linking is not successful or the waiting time is too long, you should turn off both
drone and remote control power and repeat the steps above.
