Installation of battery of remote control
Open and remove the battery cover, put into 3 AA batteries in correct polarity
(batteries installation directions are shown in pictures below), close the battery cover
and screw on it.
Set-circle mode
The drone will center around the curret head at 2 meters
and make a surround flight.
Photography
connecting the drone to APP,then press the photography
button,drone will taking photo and saving into APP.
One button taking off
If the drone is in a state of stationary frequency,pressing
this button it will taking off.
One button landing
If the drone is in a state of flight,pressing this button it will
landing.
Video
Connecting the drone to APP,then press the video
button,the drone will recording video and saving into APP.
One button return
Pressing this button,the drone will fly back and sound
“deep”,press again,the drone will stop return and hover.
Follow mode
Switch to follow mode by APP,the drone will follow the
connecting mobile phone within a certain distance.
Indoor/Outdoot flight
Please refer to page tenth.
Calibrated copass
Please refer to page eighth.
