7
3. Quick Operation Sheet for reference (Specialized for host
controller ZK6200/ZK6300)
Immediately upon receiving the machine, carefully unpack the carton, check the machine
received in good condition. Ensure safety operation of machine, please do following below
operation procedures when operate uFlamer.
Operation
step
Schematic diagram and explanation
Explanation
Installation
The device can only be placed
horizontally, if placed on truss, please
locked with extra safety ropes.
Locate safety
lock at TEST
MODE
Press the button off, The LED is off.
Before operate machine please locate
safety lock at TEST MODE.
TEST MODE: operator can test the
ignition of the flamer, but the fuel
ejection function disabled, so there is
no fuel eject.
USER MODE: the device can generate
flames normally. Please strictly follow
the safety distance requirement,
remove all human, animal or
flammable objects in the danger
area.
Fueling
Please fueling with high quality fuel
according to requirement of this
manual
Power and
DMX cable
connection
Switch ON the
machine
Press the button on.
Please confirm safety lock located at
TEST MODE before switch on the
POWER ON/OFF.
Set DMX
address
Compression
The blue LED shows the pressure is
ready.
Host controller: Press”pre-heat”
button (both of the lights on)
