SHOWTEC Stage Blinder 4 DMX Black, Руководство пользователя

Страница: 11 / 20

10
Ordercode: 30774
Stage Blinder 8 DMX
Multiple Stage Blinders (DMX control)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the Stage Blinder and other devices.
04) Flip the DIP switch # 10 on both DIP switch panels (06, 07) to OFF position.
05) Flip the DIP switches #1-9 to set the desired DMX address.
DMX Control : DIP switch #10 to OFF.
Flip the DIP switches #1-9 to set the desired DMX address.
See pages 11-12 for more information.
The pins: 01) Earth
02) Signal -
03) Signal +
06) Link the units as shown in fig. 05. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX signal cable. Repeat this process to link the second, third, and fourth units.
07) Supply electric power: Plug electric mains power cords into proper electric power supply sockets,
starting with the first unit. Do not supply power before the whole system is set up and connected
properly.
Multiple Stage Blinders DMX Set Up
Fig. 05
Note : Link all cables and set DIP switches before connecting electric power