8
Ordercode: 50702
SM-16/2 FX
04)
Channel or playback Faders: To control the different channels with the faders. When the indicator of
a scene or a chase button is on, the faders are used to control the playback.
05)
Playback page: When the indicator of a playback page button is on, the unit buttons are used to
control the playback. The playback page buttons are also used to page up/down the playbacks.
06)
Record:
With this button you can record a shape, scene or chase.
07)
Copy/include:
With the Copy/include function you are able to load selected parts of a scene back
into the programmer, copy a scene or copy a step from a chase.
08)
Delete/ OFF
:
This button is used to delete a selected shape, scene or chase. The button is also used
to leave out a selected fixture or channel out of the programmer.
09)
Time
:
With this menu button you can set a fade in and fade out time for a scene or the global time
of chase.
10)
Shape:
With this button you can control shapes of a fixture. Note: fixtures must be patched first.
11)
Setup:
To control several functions such as patch, language selection, data back-up, wipe and
loading and system information.
12)
Blackout:
With this button you are able to blackout the whole console. When <Blackout> is active the
indicator will keep flashing.
13)
Exit:
If you press this button you are able to exit every option of the controller.
14)
Page down:
Press this button for scrolling down in several menu functions.
15)
Page up:
Press this button for scrolling up in several menu functions.
16)
Menu operation Button A: With this button you can choose for several menu functions of the
controller. The display next to the buttons shows what each button will do.
17)
Menu operation Button B: With this button you can choose for several menu functions of the
controller. The display next to the buttons shows what each button will do.
18)
Clear: With this button you are able to deselect fixtures, all fixtures are cleared from the programmer.
The parameters of the chosen channels, that can be seen in the display, will be deselected. All HTP-
channel values will be set to 000.
19)
Enter:
This button you will need for confirming several menu options.
20)
Jogwheel A: With this wheel you are able to set several functions of the menu operation button A.
Jogwheel A will operate the pan function of patched fixtures. Also this jogwheel is needed for setting
the speed of a chase. Finally you have to use this wheel to adjust the patch options.
21)
Jogwheel B: With this wheel you are able to set several functions of the menu operation button B.
Jogwheel B will operate the tilt function of patched fixtures Also this jogwheel is needed to adjust the
channel number of the fixture and to set the fade in/ fade out of the scene. Finally you have to use
this wheel to adjust the patch options.
Back panel
Fig. 02
22)
Power switch ON/OFF
23)
IEC power connector
24)
USB input
25)
DMX signal connector (OUT) 3-pin
26)
DMX signal connector (OUT) 5-pin
Содержание SM-16/2 FX
Страница 23: ...22 Ordercode 50702 SM 16 2 FX Dimensions...
Страница 24: ...2015 Showtec...
