17
Ordercode: 50702
SM-16/2 FX
Fade Time:
For example, a fixture is moving from point A to point B. The fade time is set to 3
seconds, the movement of the fixture from point A to point B will last for 3 seconds.
Once the speed of chase is saved, it will run at this speed in the entire future playback:
01)
Activate the Chase button in the initial menu.
02)
Use <Wheel A> to adjust the speed.
03)
Press <A> [Chase XXX Parameters].
04)
Press <A>[Save Speed].
To set the speed of the chase at the time of editing, activate the Chase button and press <B> in the
initial menu.
Add a step
To add a step is similar to edit a chase step.
01)
Press <Record>.
02)
Press <B> <Record Chase>.
03)
Press a Unit button of the chase.
04)
Set up the lighting for the new step.
05)
Press <Enter> to store the programmer contents.
06)
Once the chase programming is finished, press <Record> to exit.
Re-edit a chase
You can also re-edit the chase by using the following buttons:
01)
Press <Record>.
02)
Select <B>[Record Chase]
03)
Press the Chase button that you want to re-edit.
04)
You can edit the chase with the options below.
•
Edit a step: press <Clear> to clear the programmer.
Press <Up>/<Down> to select a step to edit.
Press <Copy/Include> to include the data of the step into the programmer.
Edit the step. Press <Enter>.
You can choose further between “Merge”, “Overwrite” or “Insert”.
•
To insert a new step, you have to set the parameters of the new step first.
Press <Up>/<Down> to select a step you want to edit.
Press <Enter>.
Press <A> [Insert a Step].
The new step will be inserted and the following steps will be pushed back by one step.
•
To delete a step: press <Up>/<Down> to select a step you want to delete.
Press <Delete Off>.
Press <B> [Delete Step Confirm] to confirm.
•
To copy a step: press <Clear> to clear the programmer.
Press <Up>/<Down> to select a step you want to copy.
Press <Copy/Include> to include the data into the programmer.
Press enter to save the step.
•
You can add a shape in the chase by pressing <Shape>.
Then you can create a shape with the functions explained in the chapter Shapes.
05)
Press <Record> again to exit the re-edit mode.
Delete a chase
To delete a chase is the same as to delete a scene:
01)
Select the desired chase.
02)
Press <Delete>.
03)
Press the desired Unit button twice.
Содержание SM-16/2 FX
Страница 23: ...22 Ordercode 50702 SM 16 2 FX Dimensions...
Страница 24: ...2015 Showtec...
