SHOWTEC Polar 340 WashFX, Руководство пользователя

Страница: 20 / 56

19
Order code: 40101
Polar 340 WashFX IP65 Moving Head
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important: Fixtures on a serial data link must be daisy-chained in a single line. To comply with the
EIA-485 standard, no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
●
DAP Audio DMX cable by Neutrik®. Order code FL71150 (1,5 m), FL713 (3 m), FL716 (6 m),
FL7110 (10 m)
● DAP Audio DMX by Neutrik®. Order code FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m),
FL7210 (10 m)
● DAP Audio 110 Ohm cable with digital signal transmission. Order code FL0975 (0,75 m), FL09150
(1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m)
Note: Connect the Polars with the dedicated special DMX cables for outdoor use.
FL83150 DMX cable 5p XLR IP65, Neutrik®, 1,5 m
FL833 DMX cable 5p XLR IP65, Neutrik®, 3 m
FL836 DMX cable 5p XLR IP65, Neutrik®, 6 m
FL8310 DMX cable 5p XLR IP65, Neutrik®, 10 m
FL8320 DMX cable 5p XLR IP65, Neutrik®, 20 m