SHOWTEC Performer 5000 LED, Руководство пользователя

Страница: 23 / 32

22
Ordercode: 33050
Performer 5000 LED
5.7 Save DMX/Blackout
01) When the display shows , press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between the 2 options:
Blackout
DMX data save
03)
If the display shows , the Performer will blackout the output, in case of a DMX signal error.
04) If the display shows , the Performer will fall back on the last working DMX signal, which will
ensure undisrupted performance.
5.8. Zoom range settings
01) When the display shows , press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between the following 3 options:
Zoom, basic position
Zoom, 1
st
position
Zoom, 2
nd
position
5.9 Performance settings
01) When the display shows , press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between the 3 modes:
Default mode. It provides a compromise between output
quality and noise level.
Output-oriented mode. The device does not offer any
consideration for noise level and operates at full power.
Noise level-oriented mode. It emits little noise and operates at
moderate power level.
5.10. DMX data transfer
01) When the display shows , press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between the 2 options:
DMX data transfer OFF
DMX data transfer ON
03)
If the display shows , the Performer will not send DMX data to the other connected devices.
04) If the display shows , the Performer will send DMX data to the other connected devices.
6. Motor reset
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the UP/DOWN buttons to choose between Yes and No.
03) If the display shows , press the ENTER button.
04) The device will now perform a motor reset.