SHOWTEC Performer 5000 LED, Руководство пользователя

Страница: 12 / 32

11
Ordercode: 33050
Performer 5000 LED
Installation
Remove all packing materials from the Performer 5000 LED. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Color frame retaining clip
The color frame holder is equipped with a spring-loaded retaining clip. This prevents color frames and
accessories from falling out.
Make sure that all color frame accessories are locked in position with the retaining clip
before hanging the Performer 5000 LED.
01)
Press the retaining clip down, in order to unlock the color frame slot.
02) Insert the color frame(s).
03) Lock the retaining clip by releasing the retaining clip.
Fig. 04